Carbon Steel H beam

H-beam is a kind of Economic section steel, which  sectional area distribution is more optimized, the  ratio of  strength to weight is more reasonable, Mechanical properties of section is more better.It is developed from the I-section steel optimization of a better section mechanical properties of the economic section steel, because its section is same as  the English letter "H" ,so be named as H-Beam. Because the various  part of H-beam is arranged at right angles, H-beam has the advantages of strong bending resistance, simple construction, cost saving and light structural weight in all directions, so it has been widely used. H-beam as a new type of economic construction steel. The section shape of H-beam steel is economical and reasonable, the mechanical properties are good, and the elongation of each point on the section is  uniform and the internal stress is small. Compared with the ordinary I-beam steel, it has the advantages of more large section modulus,more light weight and more saving metal, which can reduce the building structure by 30-40%. And because its legs inside and outside  parallel, leg end is a right Angle, assembled into components, can save the workload of welding and riveting  up to 25%. It is often be used in large buildings (such as workshops, high-rise buildings, etc.), as well as Bridges, ships, lifting and transportation machinery, equipment foundation, supports, foundation piles, etc.

Stainless H beam

Stainless H beam  is widely used in beams and columns of industrial and civil steel structures. Steel structure load-bearing supports for industrial structures. Ship and machinery manufacturing frame structure. Steel piles and supporting structures of underground works.

Galvanized H beam

With the rise of new economic building materials, galvanized H-shaped steel is widely used, especially in steel structure buildings, supports, and bridges. In short, it is integrated with many aspects of daily life.

Galvanized I beam

I-beam, also known as steel beam (English name universal Beam), is a long steel with the section of the I-shaped. I-section steel is divided into hot rolIed I-beam  and lightweight  I-beam The characteristics of galvanized I steel:

Carbon Steel I beam

I-beam, also known as steel beam (English name universal Beam), is a long steel with the section of the I-shaped. I-section steel is divided into hot rolIed I-beam  and lightweight  I-beam II-I-beam is mainly divided into ordinary I-beam, light I-beam, low alloy light I-beam . The wing of ordinary I-beam and light I-beam gradually thinner from the root to the side, with a certain Angle. The type of ordinary I -beam and light I-beam is expressed by the Arabic number of its waist height in centimeters. . I-beam is mainly used in building structure, curtain wall engineering, mechanical equipment ,vehicle manufacturing and so on

Stainless Steel I beam

Stainless steel I-beam is a long steel bar with a grooved section. It can be used to form various stress components according to the different needs of the structure, and can also be used as a connector between components. It is widely used in various building structures and engineering structures, such as house beams, bridges, transmission towers, hoisting and transportation machinery, ships, industrial furnaces, reaction towers, container racks and warehouse shelves.

Stainless steel channel

Hot rolled stainless steel light channel steel (YB164-63) Hot rolled light channel steel is a kind of steel with wide legs and thin walls, which has better economic effect than ordinary hot rolled channel steel. Main use: for building and steel structure.Product NameStainless steel Channel Length6m, 9m, 12m Or As Your RequirementStandardJIS, GB, ASTM, EN, DINTechniqueHot / Cold RolledApplicationConstruction structureSupply Ability1000 tons per dayPaymentTT LC DP  ETC. 1. High QualityProducts Advantages2. High Dimensional Accuracy 3. Cost Savings 

Carbon steel Channel

Uchannel（U-STEEL） is a long stripe of steel with a fluted  section , construction and mechanical use of carbon structural steel, is a profile steel with  complex section , its section shape is groove shape. U-Steel is mainly used in building structure, curtain wall engineering, mechanical equipment and vehicle manufacturing., u-steel is often used together with I steel.

Galvanized steel channel

Galvanized channel steel is an effective way of metal corrosion prevention, which is mainly used on metal structures and facilities in various industries.

Carbon steel angle

The angle steel is mainly used to make frame structures, such as high-voltage transmission towers, frames on both sides of the main beam of steel structure bridges, columns and booms of tower cranes on construction sites, columns and beams of workshops, etc., small places such as flower pot shaped shelves at the festival roadside, and shelves with air-conditioning and solar energy hung under windows. Angle steel is also widely used in building structures and engineering construction, such as house beams, power transmission towers, lifting and transportation machinery, ships, industrial furnaces, reaction towers, container racks and warehouse shelves. 

Galvanized Angle

Use of galvanized angle steel: widely used in power tower, communication tower, curtain wall materials, shelf construction, railway, highway protection, street lamp pole, marine components, building steel structure components, substation ancillary facilities, light industry, etc. Hot dip galvanized angle steel is also called hot-dip galvanized angle steel or hot-dip galvanized angle steel. The cold galvanizing coating mainly ensures full contact between zinc powder and steel through electrochemical principle, and generates electrode potential difference to prevent corrosion. It is used to immerse the derusted angle steel in the molten zinc at about 500 ℃ to make the angle steel surface adhere to the zinc layer, so as to prevent corrosion. It is suitable for various strong acid, alkali fog and other strong corrosion environments.

Stainless steel angle

1 Stainless steel angle steel is widely used in the construction layout, as well as in various engineering layouts, such as the construction of beams, and has a significant effect in the construction of engineering equipment. 2. When used, stainless steel angle steel has comparative weldability, strong plasticity and deformation, and also has certain mechanical strength. 3. The corrosion resistance of stainless steel angle steel is relatively high, and it has good corrosion resistance in the production process of pulp and paper. Moreover, stainless steel is also resistant to the corrosion of ocean and corrosive industrial atmosphere.